Oxygen Cylinder Filling Station - 1.5HP/10HP

The ON2 Cylinder Filling Stations are used in conjunction with the ON2 Oxygen Concentrator Systems. A Filling Station allows users to fill their own medical grade oxygen on site to provide complete self-sufficiency and independence from gas supply companies. The facility can fill cylinders used in EMS, Ambulance, and Fire/Rescue vehicles. The advantage of ON2’s VPSA technology and higher operating pressure allows the Cylinder Filling Station to use only one oxygen 3-stage compressor to reach 2200psi. ON2 Cylinder Filling Stations do NOT require a secondary booster pump, therefore there are significant savings to the customer, reduced power consumption, and lower maintenance costs. Your Cylinder Filling Station may be designed as a stand alone system in either stationary or mobile structures. You can have emergency oxygen available for any unexpected increase in demand 24/7!

CONTACT US

  • Compatible with on-site oxygen
  • Inflation proof; complete independence from rising costs of bulk oxygen
  • Emergency oxygen available for any increase in unexpected demand
  • No demurrage fees, no facility or transporattion charges
  • A secure and dependable gas supply source
  • Custom programmed plc; automatically cycles the compressor when surplus oxygen is available
  • Plc locks out the vacuum cycle during filling process
  • User controlled indicators set fill pressure based on cylinder material type; indicator illuminates when full
  • Worldwide installation and service network with experienced technicians; 24/7 call support service
  • You will never run out of oxygen again!
COMPRESSOR  
MANUFACTURER RIX
MODEL RIX 1.5
FLOW CAPACITY 27 – 58 LPM
FILL CAPACITY 12 CYLINDERS (240 cu ft) per 24hrs
MODEL RIX 10
FLOW CAPACITY 187 – 283 LPM
FILL CAPACITY 60 CYLINDERS (240 cu ft) per 24 hrs
MODEL – NEW RIX MICRO
FLOW CAPACITY 1.7 – 7.5 LPM
FILL CAPACITY 60 CYLINDERS (240 cu ft) per 24 hrs

 

 AUTOMATION   
START/STOP PRESSURE SWITCH ON INLET
STOP/FULL PRESSURE SWITCH ON OUTLET
CUSTOM PLC CONTROLLER AUTOMATED FILL BASED ON CYLINDER MATERIAL TYPE

 

 MANIFOLD  
CONNECTOR TYPE CGA 540 (with CGA 870 adaptor)
RATING 2600 psi

 

 VACUUM PUMP  
BRAND BUSCH
TYPE ROTARY VANE
SIZE 1 HP
7746 ON2 wave trim

Gold Seal Standard

 EXPECT EXCELLENCE and a HIGHER STANDARD

Our Gold Seal Standard ensures a Higher Quality Product by ensuring…

Gold Seal Standard-WEB

ON2 Concentrator components must be “Best in Class”; Only Reputable Companies who supply products that stand the test of time and have replacement parts that are consistently and readily available

All ON2 Oxygen Concentrator components must be CRN Approved and/or meet CSA Electrical

Cost is always important but not at the sacrifice of Efficiency, Reliability, and Longevity

All ON2 Oxygen Concentrators are built to stringent CSA Standards

ON2 Installation and Service Technicians are highly trained with over 40 years of combined experience in the Manufacturing and Support of Oxygen Concentrators