Remote Oxygen Concentrator System for Disaster Relief

The ON2 Remote Oxygen Concentrator System (ROCS) is designed to meet any disaster relief scenario. The unit can be placed onsite at the scene of the emergency and started for oxygen generation with the push of a button. SwageLok outlets are provided to allow for quick connection of the unit to the emergency facility’s system. The custom programmed PLC will start up the unit, regardless of the climate or environment. ROCS will produce oxygen supply within 60 minutes of cold start. Upon start up, the annunciator panel indicates to the operator when the unit is producing oxygen and the storage tank is full. The ROCS can be configured to meet a wide range of flow requirements. Regardless of configuration the ON2 system is designed to meet the CAN/CSA-Z10083-08 and ISO 10083 standards for Oxygen Concentrator Systems.

CONTACT US

  • Innovative SOLUTIONS for disaster relief
  • Fully automated startup providing oxygen supply within 60 mins of cold start
  • Customized PLC will monitor and start unit in any weather/temperature condition
  • External controls eliminate internal tampering and increase personnel safety
  • Easily transported to disaster or relief site
  • Self stored after a controlled shutdown
  • ROCS arrives fully equipped and pre-assembled
  • Operational with minimal logistic support
  • Self contained and modularized
  • Modular design allows for coupling units to increase required oxygen demand
  • Can be deployed anywhere if connected to electrical grid or diesel backup generator
  • Minimal site preparation; level surface only
  • 24/7 support services available if deployed
 20 FOOT ROCS
MANUFACTURER ON2 SOLUTIONS
BRAND ADM STORAGE
WEIGHT 5000 LBS TYPICAL TARE WEIGHT
INSIDE DIMENSIONS W 7’4” x H 7’6” X L 19’1”
MATERIAL o   EXTERIOR- GALVANIZED, MARINE GRADE PAINT

o   INTERIOR – 1.5” HIGH DENSITY FOAM, 3/8” PLYWOOD

INTERIOR CLIMATE CONTROL o   2-5 Kw HEATERS – depending on climate

o   12-24” VENTILATION FANS – depending on climate

o   12,000-18,000 BTU AC – depending on climate

LIGHTING LED LIGHTING
EXTERIOR ACCESS 3 WALK-IN DOORS
PARTITIONS 2 AIRTIGHT PARTITIONS
SMOKE ALARMS WIRED TO EXTERNAL ANNUNCIATOR
EXTERIOR POWER SOURCE SWAGELOK QUICK-CONNECTORS
EXTERIOR OXYGEN OUTLET SWAGELOK QUICK-CONNECTORS

 

 40 FOOT ROCS
MANUFACTURER ON2 SOLUTIONS
BRAND ADM STORAGE
WEIGHT 8500 LBS TYPICAL TARE WEIGHT
INSIDE DIMENSIONS W 7’4” x H 7’6” X L 39’1”
MATERIAL o   EXTERIOR- GALVANIZED, MARINE GRADE PAINT

o   INTERIOR – 1.5” HIGH DENSITY FOAM, 3/8” PLYWOOD

INTERIOR CLIMATE CONTROL o   2-5 Kw HEATERS – depending on climate

o   12-24” VENTILATION FANS – depending on climate

o   12,000-18,000 BTU AC – depending on climate

LIGHTING LED LIGHTING
EXTERIOR ACCESS 3 WALK-IN DOORS
PARTITION 2 AIRTIGHT PARTITIONS
SMOKE ALARMS WIRED TO EXTERNAL ANNUNCIATOR
EXTERIOR POWER SOURCE SWAGELOK QUICK-CONNECTORS
EXTERIOR OXYGEN OUTLET SWAGELOK QUICK-CONNECTORS
HIGH CUBE ROCS available where permitted
DIMENSIONS W 7’4” X H 8’6” X L 39’1”

 

ANNUNCIATOR 
MANUFACTURER ON2 SOLUTIONS
ALARMS o   LOW TEMPERATURE

o   HIGH TEMPERATURE

o   LOW OXYGEN %

o   LOW VACUUM

o   LOW TOWER PRESSURE

o   SMOKE/FIRE

CONTROLS o   UNIT START/SHUT DOWN

o   EMERGENCY STOP (ENTIRE SYSTEM)

INDICATORS o   OC PRE-START

o   OC RUNNING

o   OC READY

o   OC STANDBY

o   OC READY FOR SHUT DOWN

o   OC READY TO DISCONNECT

7746 ON2 wave trim

Gold Seal Standard

 EXPECT EXCELLENCE and a HIGHER STANDARD

Our Gold Seal Standard ensures a Higher Quality Product by ensuring…

Gold Seal Standard-WEB

ON2 Concentrator components must be “Best in Class”; Only Reputable Companies who supply products that stand the test of time and have replacement parts that are consistently and readily available

All ON2 Oxygen Concentrator components must be CRN Approved and/or meet CSA Electrical

Cost is always important but not at the sacrifice of Efficiency, Reliability, and Longevity

All ON2 Oxygen Concentrators are built to stringent CSA Standards

ON2 Installation and Service Technicians are highly trained with over 40 years of combined experience in the Manufacturing and Support of Oxygen Concentrators