REMOTE OXYGEN CONCENTRATOR SYSTEMS

REMOTE OXYGEN CONCENTRATOR SYSTEM FOR DISASTER RELIEF

The ON2 Remote Oxygen Concentrator System (ROCS) is designed to meet any disaster relief scenario. The unit can be placed onsite at the scene of the emergency and started for oxygen generation with the push of a button. SwageLok outlets are provided to allow for quick connection of the unit to the emergency facility’s system. The custom programmed PLC will start up the unit, regardless of the climate or environment. ROCS will produce oxygen supply within 60 minutes of cold start. Upon start up, the annunciator panel indicates to the operator when the unit is producing oxygen and the storage tank is full. The ROCS can be configured to meet a wide range of flow requirements. Regardless of configuration the ON2 system is designed to meet the CAN/CSA-Z7396.1-2017 and ISO 10083 standards for Oxygen Concentrator Systems.
CONTACT USTESTIMONIALSFULL PRODUCT LINE
  • Innovative SOLUTIONS for disaster relief
  • Fully automated startup providing oxygen supply within 60 mins of cold start
  • Customized PLC will monitor and start unit in any weather/temperature condition
  • External controls eliminate internal tampering and increase personnel safety
  • Easily transported to disaster or relief site
  • Self stored after a controlled shutdown
  • ROCS arrives fully equipped and pre-assembled
  • Operational with minimal logistic support
  • Self contained and modularized
  • Modular design allows for coupling units to increase required oxygen demand
  • Can be deployed anywhere if connected to electrical grid or diesel backup generator
  • Minimal site preparation; level surface only
  • 24/7 support services available if deployed
MODEL
20 FOOT ROCS
MANUFACTURER
ON2 SOLUTIONS
BRAND
ADM STORAGE
WEIGHT
5000 LBS TYPICAL TARE WEIGHT
INSIDE DIMENSIONS
W 7’4” x H 7’6” X L 19’1”
MATERIAL
  • EXTERIOR- GALVANIZED, MARINE GRADE PAINT
  • INTERIOR – 1.5” HIGH DENSITY FOAM, 3/8” PLYWOOD
INTERIOR CLIMATE CONTROL
  • 2-5 Kw HEATERS – depending on climate
  • 12-24” VENTILATION FANS – depending on climate
  • 12,000-18,000 BTU AC – depending on climate
LIGHTING
LED LIGHTING
EXTERIOR ACCESS
3 WALK-IN DOORS
PARTITIONS
2 AIRTIGHT PARTITIONS
SMOKE ALARMS
WIRED TO EXTERNAL ANNUNCIATOR
EXTERIOR POWER SOURCE
SWAGELOK QUICK-CONNECTORS
EXTERIOR OXYGEN OUTLET
SWAGELOK QUICK-CONNECTORS
MODEL
40 FOOT ROCS
MANUFACTURER
ON2 SOLUTIONS
BRAND
ADM STORAGE
WEIGHT
8500 LBS TYPICAL TARE WEIGHT
INSIDE DIMENSIONS
W 7’4” x H 7’6” X L 39’1”
MATERIAL
  • EXTERIOR- GALVANIZED, MARINE GRADE PAINT
  • INTERIOR – 1.5” HIGH DENSITY FOAM, 3/8” PLYWOOD
INTERIOR CLIMATE CONTROL
  • 2-5 Kw HEATERS – depending on climate
  • 12-24” VENTILATION FANS – depending on climate
  • 12,000-18,000 BTU AC – depending on climate
LIGHTING
LED LIGHTING
EXTERIOR ACCESS
3 WALK-IN DOORS
PARTITIONS
2 AIRTIGHT PARTITIONS
SMOKE ALARMS
WIRED TO EXTERNAL ANNUNCIATOR
EXTERIOR POWER SOURCE
SWAGELOK QUICK CONNECTORS
EXTERIOR OXYGEN OUTLET
SWAGELOK QUICK CONNECTORS
MODEL
HIGH CUBE ROCS (AVAILABLE WHERE PERMITTED)
DIMENSIONS
W 7’4” X H 8’6” X L 39’1”
ANNUNCIATOR
MANUFACTURER
ON2 SOLUTIONS
ALARMS
  • LOW TEMPERATURE
  • HIGH TEMPERATURE
  • LOW OXYGEN %
  • LOW VACUUM
  • LOW TOWER PRESSURE
  • SMOKE / FIRE
CONTROLS
  • UNIT START / SHUT DOWN
  • EMERGENCY STOP (ENTIRE SYSTEM)
INDICATORS
  • OC PRE-START
  • OC RUNNING
  • OC READY
  • OC STANDBY
  • OC READY FOR SHUT DOWN
  • OC READY TO DISCONNECT

REMOTE OXYGEN CONCENTRATOR SYSTEM FOR EMERGENCY APPLICATIONS

The ON2 Remote Oxygen Concentrator System (ROCS) is designed to meet any emergency oxygen scenario. The unit can be placed onsite at the scene of the emergency and started for oxygen generation with the push of a button. SwageLok outlets are provided to allow for quick connection of the unit to the emergency facility’s system. The custom programmed PLC will start up the unit, regardless of the climate or environment. ROCS will produce oxygen supply within 60 minutes of cold start. A single exterior control starts the power supply; after start up, the annunciator panel indicates to the operator the unit is producing oxygen and the storage tank is full. The ROCS can be configured to meet a wide range of flow requirements. Regardless of configuration the ON2 system is designed to meet the CAN/CSA-Z7396.1-2017 and ISO 10083 standards for Oxygen Concentrator Systems.
CONTACT USTESTIMONIALSFULL PRODUCT LINE
  • Innovative SOLUTIONS for Emergency Relief
  • Includes integrated diesel generator; no requirements beyond oxygen hookup
  • Fully automated startup and operation of both power supply and Oxygen Concentrator
  • Can be deployed anywhere via land, air or sea
  • Fully automated startup providing oxygen supply within 60 mins of cold start
  • Customized PLC will monitor and start unit in any weather/temperature condition
  • Automated climate control (heating and cooling)
  • External controls and oxygen hookup eliminate internal tampering and increase personnel safety
  • Self stored after a controlled shutdown
  • Self contained and modularized
  • Minimal site preparation; level surface only
  • 24/7 support services available if deployed
MODEL
20 FOOT ROCS
MANUFACTURER
ON2 SOLUTIONS
BRAND
ADM STORAGE
WEIGHT
5000 LBS TYPICAL TARE WEIGHT
INSIDE DIMENSIONS
W 7’4” x H 7’6” X L 19’1”
MATERIAL
  • EXTERIOR- GALVANIZED, MARINE GRADE PAINT
  • INTERIOR – 1.5” HIGH DENSITY FOAM, 3/8” PLYWOOD
INTERIOR CLIMATE CONTROL
  • 2-5 Kw HEATERS – depending on climate
  • 12-24” VENTILATION FANS – depending on climate
  • 12,000-18,000 BTU AC – depending on climate
LIGHTING
LED LIGHTING
EXTERIOR ACCESS
2 WALK-IN DOORS
PARTITIONS
1 AIRTIGHT PARTITIONS
SMOKE ALARMS
WIRED TO EXTERNAL ANNUNCIATOR
EXTERIOR OXYGEN OUTLET
SWAGELOK QUICK-CONNECTORS
MODEL
40 FOOT ROCS
MANUFACTURER
ON2 SOLUTIONS
BRAND
ADM STORAGE
WEIGHT
8500 LBS TYPICAL TARE WEIGHT
INSIDE DIMENSIONS
W 7’4” x H 7’6” X L 39’1”
MATERIAL
  • EXTERIOR- GALVANIZED, MARINE GRADE PAINT
  • INTERIOR – 1.5” HIGH DENSITY FOAM, 3/8” PLYWOOD
INTERIOR CLIMATE CONTROL
  • 2-5 Kw HEATERS – depending on climate
  • 12-24” VENTILATION FANS – depending on climate
  • 12,000-18,000 BTU AC – depending on climate
LIGHTING
LED LIGHTING
EXTERIOR ACCESS
2 WALK-IN DOORS
PARTITIONS
1 AIRTIGHT PARTITIONS
SMOKE ALARMS
WIRED TO EXTERNAL ANNUNCIATOR
EXTERIOR OXYGEN OUTLET
SWAGELOK QUICK CONNECTORS
MODEL
HIGH CUBE ROCS (AVAILABLE WHERE PERMITTED)
DIMENSIONS
W 7’4” X H 8’6” X L 39’1”
ANNUNCIATOR
MANUFACTURER
ON2 SOLUTIONS
ALARMS
  • LOW TEMPERATURE
  • HIGH TEMPERATURE
  • LOW OXYGEN %
  • LOW VACUUM
  • LOW TOWER PRESSURE
  • SMOKE / FIRE
  • GENERATOR FAIL
  • GENERATOR LOW FUEL
  • GENERATOR FIRE
CONTROLS
  • UNIT START / SHUT DOWN
  • EMERGENCY STOP (ENTIRE SYSTEM)
INDICATORS
  • GENERATOR START
  • GENERATOR READY
  • GENERATOR STOP
  • OC PRE-START
  • OC RUNNING
  • OC READY
  • OC STANDBY
  • OC READY FOR SHUT DOWN
  • OC READY TO DISCONNECT

REMOTE OXYGEN CONCENTRATOR SYSTEM FOR MEDICAL APPLICATIONS

The ON2 Remote Oxygen Concentrator System (ROCS) is designed to meet a variety of hospital needs and building constraints. The unit can be placed onsite at a hospital that does not have the required space indoors to attain the benefits of on-site gas generation. The unit can also be used to provide an Oxygen Concentrator with a Distribution Panel and/or Cylinder Filling Station, making the hospital completely independent of gas supply companies. The ROCS can be configured to handle the most extreme of weather conditions and be deployed with the minimum of logistics support from the hospital. Regardless of configuration the ON2 system is designed to meet the CAN/CSA-Z7396.1-2017 and ISO 10083 standards for Oxygen Concentrator Systems.
CONTACT USTESTIMONIALSFULL PRODUCT LINE
  • Innovative SOLUTIONS for onsite oxygen generation
  • ROCS will replace bulk oxygen tank
  • Provides indoor storage for reserve cylinders
  • Can be placed outside building footprint with only electrical and oxygen supply connection
  • Minimal site preparation; level footing only
  • Can be easily relocated if necessary
  • Increased safety inherent in design
  • A secure dependable gas supply source
  • Self contained and modularized
  • ROCS arrives fully equipped and pre-assembled
  • Expansion & optional equipment can be added at any time
  • Automated climate control (heating and cooling)
  • Worldwide installation and service network with experienced technicians
  • 24 / 7 on call support services
MODEL
20 FOOT ROCS
MANUFACTURER
ON2 SOLUTIONS
BRAND
ADM STORAGE
WEIGHT
5000 LBS TYPICAL TARE WEIGHT
INSIDE DIMENSIONS
W 7’4” x H 7’6” X L 19’1”
MATERIAL
  • EXTERIOR- GALVANIZED, MARINE GRADE PAINT
  • INTERIOR – 1.5” HIGH DENSITY FOAM, 3/8” PLYWOOD
INTERIOR CLIMATE CONTROL
  • 2-5 Kw HEATERS – depending on climate
  • 12-24” VENTILATION FANS – depending on climate
  • 12,000-18,000 BTU AC – depending on climate
LIGHTING
LED LIGHTING
EXTERIOR ACCESS
1 - 2 WALK IN DOORS
ELECTRICAL
UNIT PRE-WIRED TO LOAD CENTRE
SMOKE ALARMS
CONDUIT IN PLACE FOR HOSPITAL SYSTEM
EXTERNAL CONNECTIONS
BULKHEADS PROVIDED FOR ELECTRICAL IN/OXYGEN OUT
MODEL
40 FOOT ROCS
MANUFACTURER
ON2 SOLUTIONS
BRAND
ADM STORAGE
WEIGHT
8160 LBS (BARE CONTAINER)
INSIDE DIMENSIONS
W 7’4” x H 7’6” X L 39’1”
MATERIAL
  • EXTERIOR- GALVANIZED, MARINE GRADE PAINT
  • INTERIOR – 1.5” HIGH DENSITY FOAM, 3/8” PLYWOOD
INTERIOR CLIMATE CONTROL
  • 2-5 Kw HEATERS – depending on climate
  • 12-24” VENTILATION FANS – depending on climate
  • 12,000-18,000 BTU AC – depending on climate
LIGHTING
LED LIGHTING
EXTERIOR ACCESS
1 - 3 WALK-IN DOORS
ELECTRICAL
UNIT PRE-WIRED TO LOAD CENTRE
SMOKE ALARMS
CONDUIT IN PLACE FOR HOSPITAL SYSTEM
EXTERNAL CONNECTIONS
BULKHEADS PROVIDED FOR ELECTRICAL IN / OXYGEN OUT
MODEL
HIGH CUBE ROCS available where permitted
DIMENSIONS
W 7’4” X H 8’6” X L 39’1”